How to measure your ring size at home
- Calibrate once. Press Calibrate, hold a bank card to the screen and match the outline. A US quarter should then cover the check circle exactly. Without this step, no on-screen ring sizer can be trusted.
- Measure a ring that fits – the most accurate way. Lay it flat on the circle and change the size until the circle just fills the inside of the ring.
- Or measure your finger with a strip of paper or string, then tap the mark on the on-screen ruler. Add the knuckle measurement if your knuckles are wider than the base of your finger.
- Pick your band width. Wide rings feel tighter, so the result adjusts for them.
Tips from jewellers
- Measure the finger the ring is for. Your dominant hand is usually slightly bigger, and the same finger differs left to right.
- Measure at the end of the day at a normal temperature. Fingers are smaller when cold and bigger after exercise, in the heat or after a salty meal.
- Measure two or three times. Use the middle result.
- A good fit slides over the knuckle with slight resistance and doesn't spin freely.
- Between sizes? Go up. A slightly loose ring is more comfortable and easier to resize.
How ring sizes work
A ring size is just the inside of the ring. The international standard, ISO 8653, gives it as the inner circumference in millimetres – that's also how France, Germany and most of Europe label sizes, so an EU 54 ring is 54 mm around the inside.
US and Canadian sizes go up by 0.032 inch (0.81 mm) of diameter per size and come in quarter sizes. UK and Australian sizes are letters, each 1.25 mm of circumference apart. Japan uses 号 sizes, where each step adds a third of a millimetre to the diameter. Italy and Switzerland use the circumference minus 40.
The chart on this page is calculated from those definitions rather than copied from a shop, so every column lines up. Real brands sometimes run half a size small or large, so check the seller's own chart if they have one.
Measuring someone else's ring size secretly
Borrow a ring they wear on the same finger and measure it here in a minute – that beats guessing. If you can't, trace the inside of their ring on paper and match the circle to your tracing, or buy a style that can be resized. Most jewellers resize a plain band by one or two sizes easily.
Nothing you measure leaves your device: the calibration is one number stored in your browser.
Frequently asked questions
How can I find my ring size at home?
Use a ring that already fits the finger: lay it on the calibrated circle and match the inside edge. No ring? Wrap a thin strip of paper around your finger, mark it, and measure the length on the on-screen ruler. Calibrate once with a bank card so the screen shows real millimetres.
Is an online ring sizer accurate?
It's as accurate as the calibration. With a bank card (85.60 mm) you're usually within about a quarter of a US size, which is close to what a jeweller's plastic sizer gives. Without calibration a screen sizer can be several sizes off, which is why this page asks you to calibrate first.
What's the most common ring size?
In the US most women wear size 6 to 7 and most men 9 to 10. Fingers vary a lot, so measure rather than guess.
What if I'm between two sizes?
Choose the larger size. Fingers swell in the heat and later in the day, and a slightly loose ring is easier to live with (and to fix) than one that won't pass the knuckle.
Do wide rings need a bigger size?
Often, yes. Bands wider than about 5 mm sit on more of the finger and feel tighter, so many jewellers suggest going up a quarter to half a size. Pick your band width above and the result adjusts.
How do US, UK and EU ring sizes compare?
EU (ISO) sizes are simply the inner circumference in millimetres. US sizes go up 0.032 inch in diameter per size, UK sizes use letters 1.25 mm apart. For example US 7 ≈ UK N½ ≈ EU 54.4 ≈ Japan 14号. The full chart is below the tool.
How can I find someone's ring size secretly?
Borrow a ring they wear on the right finger for a minute and match it on the screen here – that's the most accurate secret method. Otherwise trace the inside of one of their rings on paper, or ask a friend or family member.
Sources
- ISO 8653:2016 Jewellery – Ring-size – Definition, measurement and designation (size = inner circumference in mm).
- JIS S 4700 (Japanese translation of ISO 8653 – ring sizes in mm, not 号).
- Platinum Guild International Japan: 号数 and inner diameter (1号 = 13 mm, +1/3 mm per 号).
- Wikipedia: Ring size – US, UK (BS 6820) and Italian scales.
- CHRIST Juweliere: Größentabelle Ringe (German sizes = inner circumference).
- Chaumet: Comment connaître sa taille de bague (French size = tour de doigt in mm).
- ISO/IEC 7810 ID-1 card format: 85.60 × 53.98 mm (bank cards, ID cards, driving licences).
Updated: