How to use the dead pixel test
- Clean the screen with a dry microfibre cloth, and turn the brightness up.
- Press Start test (or F). The screen fills with one colour; the top shows where you are, e.g. “3 / 9 · Red”.
- Move your eyes slowly across the whole screen, corners too. Then go to the next colour: click or tap the right half, press → or Space. The left half or ← goes back. Auto-advance can step for you.
- See a dot that doesn't belong? Press and hold on it (right-click or M on a computer). A ring marks the spot and stays there on every colour, so you can check it against all of them.
- Press Esc or ✕. Under the test you'll see how many spots you marked.
The test takes about a minute. Do it on the day a new monitor, laptop, phone or TV arrives – that is when returns are easiest.
How to read what you see
| What you see | What it is | Best seen on |
|---|---|---|
| A black dot on every colour | Dead pixel (no power) | White |
| A white dot on every colour | Bright or “hot” pixel (always on) | Black |
| A red, green or blue dot | Stuck pixel or stuck sub-pixel | Black, and the other colours |
| A dot that disappears after wiping | Dust or a mark | White |
| A faint shape that doesn't belong | Burn-in or image retention | Grey 50% |
| Bright patches at the edges in the dark | Backlight bleed or IPS glow | Black |
Every pixel is made of three tiny parts: red, green and blue. If one part is stuck on, the pixel shows that colour on black. If all three are stuck on, it shows white. If the pixel gets no power at all, it stays black.
Stuck pixel fixer
A stuck pixel can sometimes be “unstuck” by switching it on and off very quickly. Choose Stuck pixel fixer, read the warning, and start it. Drag the flashing box over the stuck pixel (or choose “Whole screen” if you can't find it), then look away and leave it for 10 to 30 minutes. Afterwards run the dead pixel test again. Tip: mark the stuck pixel in the dead pixel test first – the fixer box then starts right on that spot.
Be realistic: the fixer helps some stuck pixels and never brings back a dead one. Don't press on the panel or heat it – that can create more faulty pixels and may void the warranty.
Safety: the fixer flashes much faster than the three flashes per second that accessibility guidelines treat as safe. Don't use it if you or anyone nearby is sensitive to flashing light.
Burn-in test (OLED)
OLED screens – most new phones, many TVs and some laptops and monitors – can keep a faint ghost of things that stay on screen for hours: a taskbar, a news ticker, a game's map. Choose Burn-in and look at each grey and colour screen at full brightness. If a ghost fades after a few minutes, it is temporary image retention. If it stays, it is burn-in.
Backlight bleed test (LCD and IPS)
LCD screens light the picture from behind, and some light can leak at the edges. Darken the room, set the screen to about half brightness, choose Backlight bleed and look straight at the black screen. Cloudy bright patches at the edges that stay put are backlight bleed. A silvery glow that moves when you move your head is IPS glow, which is normal for IPS panels.
Dead pixels and warranty
Most monitor makers follow the ISO 9241-307 standard, and most screens are sold as Class 1, which accepts a few faulty pixels across the whole screen. So a single dead pixel often isn't enough for a free replacement, while several bright pixels or a cluster usually are. Some brands promise “zero bright pixels”, and many shops accept returns within the first days. Mark the spots, take a photo, and contact the shop or maker quickly.
On a phone, tablet or TV
- Android: works in full screen in Chrome and other browsers.
- iPhone and iPad: Safari keeps its bars visible. For true full screen, add the page to your Home Screen and open it from there.
- TV: open the page in the TV's browser, or cast a laptop tab to the TV.
For a single colour that stays on, use the white screen or black screen.
Frequently asked questions
How do I check my screen for dead pixels?
Clean the screen first, so dust isn't mistaken for a fault. Press Start test: the screen fills with black, white, red, green, blue and other colours in turn. Look slowly across the whole screen on each colour. A dot that doesn't match – black on white, bright on black, or a coloured dot on everything – is a faulty pixel. Press and hold (or right-click) to mark it.
What is the difference between a dead pixel and a stuck pixel?
A dead pixel gets no power and stays black on every colour; it shows up best on white. A stuck pixel has one or more of its red, green or blue parts stuck on, so it shows as a red, green, blue or white dot, best seen on black. A 'hot' or bright pixel is a stuck pixel that is always fully lit.
Can a dead or stuck pixel be fixed?
Truly dead pixels usually can't be fixed at home. Stuck pixels sometimes come back after running a flashing fixer over them for 10–30 minutes, or on their own after some days of use. Avoid pressing hard or heating the screen – it can damage more pixels and void the warranty.
Does the stuck pixel fixer work?
Sometimes, for stuck pixels only. It flashes colours quickly to make the pixel switch states again. Results vary: some pixels recover in minutes, many don't. It cannot revive a dead pixel. Read the flashing-light warning before using it.
How many dead pixels are acceptable under warranty?
It depends on the maker. Many monitors follow ISO 9241-307 Class 1, which allows a small number of faulty pixels on a whole screen, so one dead pixel is often not enough for a free replacement. Some brands and shops offer 'zero bright pixel' guarantees or easy returns in the first days. Check your maker's pixel policy and test a new screen straight away.
Is it a dead pixel or just dust?
Gently wipe the screen with a dry microfibre cloth and look at the spot from an angle. Dust and marks move or look different from an angle; a faulty pixel stays in exactly the same place and is sharp at any angle. A magnifier or your phone camera zoom helps.
How do I test for OLED burn-in?
Choose Burn-in and step through the grey and colour screens at full brightness. Look for faint shapes that don't belong – a keyboard bar, a channel logo, a navigation bar or a game's health bar. Burn-in on OLED is permanent; short-lived ghosting that fades after a few minutes is image retention, not burn-in.
Does this work on phones, tablets and TVs?
Yes. On phones and tablets tap to start, tap right or left to change colour, and press and hold to mark a spot. On a smart TV open the page in the TV's browser, or cast a laptop tab to the TV.
Sources
- W3C WCAG 2.2, Understanding 2.3.1 Three Flashes or Below Threshold (why flashing content needs a warning).
- Lenovo Support: What if a defective pixel is found on your monitor – policy and ISO 9241-307 classes.
- MDN Web Docs: Fullscreen API.
Updated: